G68.2 performs the sames funtionality as the Fanuc 3-D Coordinate Conversion using G68 but simplifies it to a single line of code. G68 3-D Coordinate Conversion required 2 lines of code to activate.
Hi, I have never used the polar coordinate rotation before. I've been looking at it the last day or so to see if that would be better for us than what we are doing now. The main advantage of it seems to be that there is just the linear feedrate at the beginning of the toolpath with the G12.1, as ...
I have read the Mori Book, the Fanuc Book, and talked to the Mori Applications Engineer, Aswell as read every thread related to it on the forum, and sadly I still am struggling Things I know · Fanuc 31iA5 on Mori NMV5000, needing to cheat my B axis (around Y) to deal with some casting indifferences.
Fanuc said it should read XYZBC not XYZCB. The dealer said he was told that it shoukd not make a difference (from rotary installer) except visually it just shows that way on the screen The problem is the kinematic settings are being flipped to compensate and now the drilling cycle goes to the opposite side of X centerline.
Good Morning/Evening Gurus, I was flipping through the Fanuc 16/18/16i/18i programming manual and came across a section about using G68 for 3D coordinate conversion. Anyone familiar with using G68 in this fashion? If you have programming examples you could share that would be great. We only have ...
Hello eM, For which applications and types of machines is it better to use G93 instead of G94, or inverse time feed instead of feed per minute. Thank you
Fanuc 31i control... Got an application where I need to peck drill with a right angle head, So the drill cycle will run in the Y axis rather than the Z axis. I started looking into a macro for doing this, but then got to wondering if I am just over complicating things So in my head I was thinking...
I am trying to bypass the door interlock on HAAS machine with Fanuc controller. Is there such a command to do so. I heard K11.7 does the trick but could not find the resource to do so. I am trying to open the door and lock the fixture and rotate the angle to lock the fixture and then continue wit...
We currently have many Fanuc Robodrills with different versions of Fanuc controllers. We do not have 4th axis's on any machines which cause us to do a lot of fixturing and bringing the machine to the home position then stopping the program with a M0 command, and moving the part to the next positi...
